Flail / MorningStar

----Flail - Morning Star ----

Tried to make a Flail / MorningStar.

I sliced it with Simplify3D

Everything was printed in 0.20 (infill 100%)

except for...

Shaft 0.24 (infill 10%)

Sphere 0.24 (infill 100%)

You need to print:

2x Spheres (Outline/Perimiter Shells 4-5 min)

18x Spikes

1x the rest

The "Sphere centering ring" is optional, I just found it easier when glueing the Sphere halves together.

The Chain is not mine, its from "Chain Generator" here on Thingiverse

Start printing the Chain.

Then print the "Chain Lock" and during the print insert one end of the Chain.

Then print the "End Cap Top" this time insert the other end of the Chain.

Print the rest and glue together Sphere halves and Spikes.

This is just how I printed mine.

If you have any questions, please feel free to ask.

NB. The best glue for PLA is "Loctite super glue GEL" (just my oppinion)

See my other things HERE

Print Settings

Printer:

Creality CR8

Rafts:

Supports:

No

Resolution:

Infill:

10 - 100%

Category: Toys & Games