Toy Train Tank Car BRIO / IKEA compatible

Tank car for toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below).

You will need 10 screws to put everything together:
8x ISO 14585 2.9mm x 13mm (https://amzn.to/3WgKty1)
2x ISO 14585 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)

You can add magnets on each side of the tank car by using 2x ISO 14585 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)

If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you! Lovely 3D printed Toy Trains

Print instructions

Print as imported into the buildplate. No supports or anything.

Use 3 Perimeters for the embossed text and screws to hold better.
Already included in the GCODE


Copyright:

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863

The digital files (STL and other formats) may never be resold, shared, remixed or given away.