Marvel United Card Trays (Season 1 and 2)

Vertical card storage for character and villain cards for Season 1 and Season 2.

Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage

Card sleeves

These trays have a 67.5mm wide card rows.  Make sure your sleeves are narrower than this (should be most card sleeves).  I used “perfect fit” or “inner sleeves” on mine and was able to fit both seasons in two boxes.  I'm not sure how well thicker sleeves would fit.

Versions

There are two trays included:

• “card-tray” - This has three full vertical rows and three shorter horizontal rows for cards
• “card-tray-villain” - This has three full vertical rows and a seperate spot to hold the villain dashboards

Printing

This tray is 250mm x 250mm and designed to fit in the core boxes (with lid lift).   I have provided files for printers that can print the entire thing at once, as well as split files for printers with smaller print beds

• card-tray-full - Use this if you can print the entire tray at once
• card-tray-split-(bottom-left, bottom-right, top-left, top-right) - Use these files and glue them together if your printer has a smaller than 250mm bed size

Card Dividers

The card dividers I used in the photo above are the amazing work done by spiff and are available on BoardgameGeek:

• Marvel United Season 1 Vertical Dividers
• Marvel United Season 2 Vertical Dividers