Upgrade keys for Abyss boardgame

These are 3d printed keys for the boardgame "Abyss". Really fun game with awesome components so I thought I would upgrade the keys from the cardboard chits to 3d objects. My wife drew the 3 level STL this came from and then I made the 3d file from that.

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

No

Supports:

Resolution:

0.1 mm

Infill:

Notes:

The first layer of this is really thin, so I would pay attention to your setting for initial layer height. I have mine set to 0.3mm for this so that way it gets a few passes before moving up.

Post-Printing

I printed this with ABS and used ABS slurry to glue them together so I was not really that concerned with possible holes in the print on the first layer. The slurry would get into it and fill them.

I am going to spraypaint them silver, I think they will look very nice once I do that. I am also considering acetone smoothing as an experiment.

Category: Games