November 19, 2024
Description
Made this simple, small life counter for Magic the gathering originally, but do not use it for that anymore because they DMCA claimed this model.
It uses a 684zz bearing push fit in (you may have to file it out some if you print lower than 0.3mm resolution)
Printing: no supports, print on it's flat side
Post: I used a white paint pen to fill in the numbers, then went with the grain with isopropyl alcohol to wipe off the excess that fell outta the lines
Tinkercad link if you wanna customize.
License:
Creative Commons — Attribution
brennanb414
