Mandala Board Game Box Insert

My wife and I have been taking Mandala to the local brewery to play and I got fed up with the cards scattering in the box and sometimes splitting the protective sleeves so I finally designed this box insert to keep it all in place.

The insert is designed to fit perfectly within the retail box. The 2 card slots are large enough to fit sleeved cards and is tall enough to not let them slip out against the lid. 

Printing Settings:

Layer Hieght: 0.2mm

Infill: 15% grid

Supports: no

I printed it on a Ender 3 S1 at 70mm/s, and without a top or bottom layer to save on filament and print time. With this setup it took me about 4h 30m to print.