June 13, 2022
Description
The Scythe board game has a great Automa for solo player mode, but there are many things to keep track of. This tray organizes all the cards and pieces for the Automa player. The tray is designed for sleeved cards.
Discarded Automa cards (not used for combat) stick out from the right side of the tray so that the Resource Box on the top card is visible in the event that combat takes place.
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.8 mm
Infill:
20%
Filament: eSun; Amolen PLA+; PLA Pine Green; Frosted Bronze
Notes:
The main body of the tray was printed in pine green. The grid that goes over the Automa Star Tracker Card was printed separately in frosted bronze and then attached to the tray with super glue. The sides of the grid are symmetric, but the bottom part is thicker than the top part in order to align the grid properly with the card.
The Scythe logo image was downloaded, turned into black and white with Gimp, and converted to a .SVG file with Inkscape. The tray was designed in Fusion 360 and exported as a .STL file through MeshMixer.
Category: GamesLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
Spinodal_Zeugma
