Lucky 13 - Pistol Remix

I wanted a little more detail in the Lucky 13 pistol that was still easy to print without supports.

***UPDATE 06/13/2022***

Tweaked the serrations and depth of the groove separating the slide and body.

I used a 0.4mm nozzle and PrintBed PLA:

• Slicer setting of 0.12mm layer height.
• 3 perimeters
• 5 top layers and 4 bottom layers (probably overkill :-))
• 15% Infill
• 20mm/s print speeds
• 50mm/s travel speeds
• No raft or brim