るるどらいおん

Changes:

2023/12/25 - Replaced file “leg_r.stl” with “rurudo_leg_r.stl” due to issues with opening the original file.

Rurudo Lion

https://twitter.com/Coal/status/1536913592766697473

I'm still new to this, expect some things may not fit together the greatest.

I printed as several different parts, but I have also included an STL with the model in one piece (I didn't attempt to print this one).

I have included two different face parts. One has the eyes textures embedded into it, and the other has the standard smooth area for if you want to paint.

Glueing will be required for some of the pieces to stick together.

I sliced/supported in Lychee. If you want to use the supporting I did for my prints, here is the lychee project file:
https://mega.nz/file/uhRACCIR#J-1C_6WMn0Ac3iUHjkw4CKar9K7-sGSiQNT7GdFlNaU

If you print your own, I would love to see it so feel free to message me or tag me on twitter!

---

If you want to support my work, here is my ko-fi. Any support is appreciated but absolutely unnecessary.