Toy Train Box Car BRIO / IKEA compatible

Box Car toy train (BRIO / IKEA compatible)

A big thank you to SCHWEINERT.COM

Without your fantastic Locomotives and Tanker Car, I would not have been inspired to design this Box Car.  No train is complete without Coal Cars and Box Cars.

I am using the same wheels and wheel pivots as the SCHWEINERT.COM Tanker Car.  I take not credit for this design as it works flawlessly.  I have included them in my downloads for your convenience.

You will need 10 screws to put everything together.
8x ISO 14585 2.9mm x 13mm
2x ISO 14585 2.9mm x 19mm

You can add magnets on each side of the tank car by using 2x ISO 14585 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm.

Also check out my Coal Car.