June 19, 2022
Description
Print a mold and fill it with concrete.
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
3 %
Notes:
Wall line count = 1
Need support if you want to print the plastic variant.
Casting
Measure the concrete by pouring it into the mold. Add a little more so that the casting will not be lossless.
Move the concrete to another bowl and add water. The concrete should be able to flow through your fingers with a little resistance.
Sawing
It is a one-time mold so saw out the statue.
Painting
Category: CreaturesLicense:
Creative Commons — Attribution — Share Alike
FuzzyRaptor
