Tomica Ferrari LaFerrari Display Base

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

Description

The display base is separated into 2 parts for easy printing and colour swap. The parts are:

1) Base
-BaseV4-StripeV2.STL

2) Base back wall:
-BoxBackV4.STL

Print Settings

Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BaseV4-Stripe":
1) Start (Lines background colour, mine is in black)
2) Layer 4 (Right stripe colour, mine is in red)
3) Layer 11 (Middle stripe colour, mine is in white)
4) Layer 16 (Left stripe colour, mine is in green)
5) Layer 21 (Overall base colour, mine is red)

Filament change layer for colours on "BoxBackV4":
1) Start (Stripes background colour, mine is in black)
2) Layer 9 (Lowest stripe colour, "F" background colour and overall wall colour, mine is in red)
3) Layer 14 (Center stripe colour and LaFerrari logo, mine is in white)
4) Layer 19 (Right stripe colour, mine is in green)

Assembly

The car is tied by wires through the hole in the base

Back plate should slide in nicely into the display base.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

If there is any minor edits you want, send me a message or comment!