F1 Tracks with Elevation (and without) 3D Printer File Image 1

F1 Tracks with Elevation (and without) 3D Printer File Image 2

F1 Tracks with Elevation (and without)

Edigorin

June 21, 2022

Description Comments Tags

Description

Recently I became interested in F1, so I decided to design some tracks with their elevation.

They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are in scale to each other.

If you like my work, please consider buying me a coffee (https://www.buymeacoffee.com/JeromeP) or leaving me a tip on Paypal (https://paypal.me/pirottejerome). Thanks!

Edit 02/04/2021

I reworked the circuits to make sure they are in scale to each other and look similar, but most importantly to switch to an easier modelling workflow.

added theAlbert Park Circuit (Melbourne, Australia)
added theAutódromo José Carlos Pace (São Paulo, Brazil)
added theAutodromo Nazionale Monza (Monza, Italy)
added theBahrain International Circuit (Sakhir, Bahrain)
added theBaku City Circuit (Baku, Azerbaijan)
added theCircuit de Barcelona-Catalunya (Montmeló, Spain)
added theCircuit de Monaco (Monte Carlo, Monaco)
added theCircuit de Spa-Francorchamps (Stavelot, Belgium)
added theCircuit Gilles Villeneuve (Montreal, Canada)
added theCircuit Paul Ricard (Le Castellet, France)
added theHockenheimring (Hockenheim, Germany)
added theHungaroring (Mogyoród, Hungary)
added theRed Bull Ring (Spielberg bei Knittelfeld, Austria)
added theShanghai International Circuit (Shanghai, China)
added theSilverstone Circuit (Silverstone, United Kingdom)
added theYas Marina Circuit (Abu Dhabi, United Arab Emirates)

Edit 24/08/2021

Every model was a little bit distorted because of a miscalculation in the coordinates. Therefore, I redid all the tracks once again. They are now perfectly in scale to each other.