Magic the Gathering Life Counter (Remix)

I rescaled the original model and made it fit the 608ZZ bearings I already had. 

Successfully printed with 0.15mm resolution on Prusa Mini+.

The bearing sits a bit tight in the hole, but can be pressed in with some force (maybe with the help of a vise). 

The peg on part 2 was not sitting tight enough for me, however a few carefully placed drops of glue on the inner ring made it hold extremely well.

I also added inlays for the digits to print in a different color. They don't seem to fit in the recesses at first, but as with the bearing, they can be carefully press-fitted using a vise. 

Alternatively the slicer can be set to do a XY-compensation (~ -0.1mm, maybe less) to make them fit a bit easier (but they might too loose then and fall out, maybe apply some glue again).