Airsoft GBBR AR lower receiver cover by Mui the GBB Marksman

English ver. below.

大約2016,17年梅開始想整舊野去拆開支AR 去打game. 我同佢主要都係跟車+背囊, 所以就算MK18咁短, 用3 day 都係會突出黎.佢開始搵我諗點整同埋印出黎, 同時賣街.

當初只係打算俾VFC用, 搞下搞下佢想所有牌子通用, 所以搞左好耐試左12個version左右.最主要當時我初初學畫圖仲要用sketchup, 加埋架機未tune好, 所以來來回回左好多次.

當整好之後佢就叫我拎去賣, 佢最後都冇話要分錢之類, 其實都係幫補下我玩玩具既錢, 當時啱啱出黎做野又半工讀, 其實唔多夠錢洗, 佢一直就係教我整玩具, 又幫我好多好多.

去到2018年我決定用solidworks 重新畫過, 當中只係fit返3D printer個設計要求. 

當然你會問點解舊野咁核突, 呢個問題我都問過佢. 佢個答案就係「舊野係function 用, 唔鍾意就唔好柒買」. 為左尊重佢所以我到宜家都係冇改佢個設計

佢過左身已經三年, 我都已經冇心機去再印, 留檔案亦都冇意義, 市面上都已經有人開始印類似既野賣.

多謝佢對我, 對呢行同埋gamer既好. 件野上面有兩個名, 一個係08小隊, 我地一齊打Game既朋友隊, 另一面就係我個page, 雖然已經消失左.

鍾意就拎去用, 唔好改左個名話自己出就OK.

有時間, 有機會可以去睇下佢個channel

https://www.youtube.com/channel/UCVucqO6KNPDQWQlPZ52Hbtg

除左KJ冇試過之外, 應該市面上AR都可以通用, 包括埋762 AR

要用TPU印, 唔係WE一定用唔到.

-----------------------------------------------------------

Airsoft GBBR AR lower receiver cover

Fits WA, G&P, WE, TM, VFC, GHK, KWA ARs, also 762 ARs

for transporting with backpacks while on foot.

in memory of my best friend MUI the GBB Marksman.

https://www.youtube.com/channel/UCVucqO6KNPDQWQlPZ52Hbtg

print with TPU