A Rope Track (Zip Line, Aerial line) kit for TrixTrux toy cars

This kit contains models of clamp parts and handle to create a rope track (Zip Line, Aerial line) suitable for TrixTrux toy cars. 

You may use handles and clamps in any combination to make rope track in multiple combinations. It is possible to use clamps or handles in any point of track: on the end or in the middle. It's possible to connect the clamp to other original TrixTrux stunts and tube guides.

This kit is designed for using 3mm or similar rope. Here is no fixing parts for rope's ends - simply make a knot and insert rope into hooks.

Use one 4x20 or 4x25 woodscrew to fix the cap to the clamp screw.

Please note: this is an independent design not compatible with original TrxTrux rope track.

I printed models using PETG and PLA plastics and found that silk PLA plastics aren't suitable for the clamp body due to increased flexibility and reduced adhesion between layers in compare of ordinary PLA or PETG. But you may print screws, caps or handles using silkPLA