Agents of Adventure Storage and Organizer

This is a storage solution for the free Print & Play (PNP) game Agents of Adventure which the files are provided at PNPArcade.

I found the game to be super fun as it pits your 3 heroes against tons of different bosses (Masterminds) and plenty of missions to complete. Due to amount of sets, bosses, heroes and missions, there's tons of replayability. 

The offset difference between the lid overlap with base is 0.2mm. The pictures shows my print with an offset of only 0.1mm and it's a little tight but works. I also removed the notches on the ends for the current STLs as they don't seem to be necessary.

I've also created Dividers to split all the different encounter types, missions, motivations, masterminds and heroes. They are included in a PDF here and on BoardGameGeek.

The lid comes in two versions: with or without the logo on the sides. I've also created stickers to fit the lid sides and top to be a bit fancier although my image manipulation skills are lacking. Again, they are included in a PDF here and on BoardGameGeek.

The dice box has a slide out lid and doubles as the dice tray with a filet ramp to easily grab dice during the game.

All of the walls on the game box are 3mm thick with the overlaps at 1.4mm. The dice box walls are 2mm thick.

Note: I have no come up with a rulebook yet that would fit in this storage but would like to in the future. It's a fairly simple game to understand though so not a big task at the moment.