December 12, 2022
Description
A dartfly that is scaled to a titan rocket.
Requires a printer that is at least a Prusa MK3 in build size. There is also a one piece flapper if one has a super larger printer. (400 x 400 angled at 31 degrees)
Requires additional hardware compared to the normal version.
Hardware-
Superglue
E tape to shim the tube pieces to the pipe
A pipe that corresponds to the base stl, a caliburn plunger (1.5 inches), a sch40 1.5 inch tube or a 32mm/1.25inch OD pipe.
2 3/8 16 thread threaded rods at 13.5 inches
8 3/8 16 nuts
4 velcro strips for the endcaps
License:
Creative Commons — Attribution — Noncommercial — Share Alike
racerethan
