Mexican Train Dominos

A coworker mentioned he had some broken and lost pieces to his Mexican Train dominos set. He asked if I could print him replacements and add a little accent train track around the center. Hopefully if you have one of these sets and pieces are broken or missing… this can get you back up and running.

The train figures can be tricky to print with a 0.4mm nozzle. Go slow, and I recommend a raft if you tend to have bed adhesion issues. Also printing more than one at a time can help cooling.

I have included STL files, Step Files, and links below to the native Onshape files. 

Onshape Link: https://cad.onshape.com/documents/19205f82e1f633b3da75f08b/w/32430bdd93377501ea9a883d/e/6a399a3f4fbf80ed59d7b65f

(Both the central hub and the train figure are in the same document in Onshape. Look at the tabs along the bottom to switch between files)