CR2032 Light Ring Remix

Modified version of "Illuminated Bling Ring" & “Illuminated Bling Ring with CR2032” by user GeekMomProjects

(also see different cover with this top - https://www.printables.com/cs/model/262109-star-covershadetop-for-cr2032-light-ring-remix )

I wanted to have dome version, but for version CR2032 which was not available even with combining with other user's model.

Modified: 

• Ring/Battery holder - center of the LED in center of the dome
• wire channels to match new position
• new locking system ring-dome
• dome is based on original, but scratch build new, slightly larger to fit around battery
• removed claw-tip near led area
• added led polarity clue for round packages
• changed distance inbetween led wires/pins place

Works with any 5mm two wire LED that lights up directly from CR2032 (LED).

If you have trouble to tight-fit push parts together : 

• verify you are mounting into correct position/rotation
• you can gently squeeze dome on thicker sides during push
• verify if led wires are not stuck on sides and blocking the lock-fit

Don't get confused, some RGB / changing color leds does light up even if they are rated on higher voltage. Mind the polarity, always longer wire goes on + (bottom=larger surface of the battery). Also - Flat side of round package of the LED matches flat line at mount place near wire hole (first picture).

Tested so far (all worked) gme.cz shop:

My most favorite led effect was this one:

https://www.gme.cz/led-5mm-fade-rgb-4000-2180-7000-30-ost1ma5a32a 

for mount guide (if you need) follow clue on the picture or steps by original author here:
(https://www.printables.com/cs/model/136889-illuminated-bling-ring) 

and

https://www.printables.com/cs/model/153418-illuminated-bling-ring-with-cr2032