Evil Gift Card Torture Box - The perfect gift for your enemy (or friends)

Gift cards are boring. Need a way to make them more exciting while also being obnoxious? This is the model for you!

• Print 1 of the top files (window or not windowed), 1 of the bottom files, and the spacer.
  •  I would only do 1 of the windowed parts at a time, otherwise they can just get the info off the back and that would ruin the fun. 
• Put everything together using a socket wrench
• If you are going to have them open it with the 3d printed wrench, I would use that to do the final tightening, so that you don't overtighten. 
• For the wrench, you should not have any issues with using PLA, as long as you use 3+ walls. 
  • If you do have problems with the wrench, there's a 2nd file that should be stronger.

The Fusion 360 files are included, so you can make any changes or add a personalized message like I have in the past. 

Does this not seem evil enough for you? Well, the wrench fits perfectly inside of one of the labyrinth gift boxes. Imagine the horror when your victim finally opens the labyrinth and realizes the pain is just starting! 

You'll need the following hardware:

6x 5/16 x .75 inch bolts

6x 5/16 nylon lock nuts

6x 5/16 washers (optional)