Itty Bitty Fidget 6x1.75mm magnets

Uses these magnets from amazon. They are actually 6mm x 1.75mm, at least the ones I received. Was able to friction fit the magnets in the button, used CA glue for the ones in the bottom. Works well, printed in overture PLA at .1mm layer height and ironing on the bottom for smooth sliding.

Contains files for 2 magnets (2 magnets stacked for a stronger pull, 6 magnets in total) or single magnets (smoother operation, 3 magnets total).

The button and bottom are modified for the different magnet size, top is the same as the original model found here: https://www.printables.com/model/205599-itty-bitty-fidget