Sailing boat

List of non-printed parts

• 4 pcs - 30mm M6 screw with internal hex head

Printing

All parts can be printed without supports. For printing the HULL and BOARD parts I recommend using brim. The SAIL part has to be printed with 0.15 mm layer height. You can use a plain SAIL or a version for printing with MMU.

When printing HULL, it is necessary to insert four M6 30mm screw with internal hex head as a ballast load. This insertion pause needs to be set in PrusaSlicer.

Assembly
The parts HULL, BOARD and both JOINTS need to glued together. The sail is slid onto the boom and then onto the mast.