Shuffleboard

Here is my design of the famous Shuffleboard game!
It's the first game of a series of games I'm gonna be releasing the next days. I hope this will bring some joy in these tough days and counter your boredom.
You can extend the playing field by printing more middle pieces if you like!

Assembly guide:

1. Print all of the provided .3mf or .gcode files. You may want to make a color change for the text height (not neccessary though). Print upside down to have a smooth playing field (textured sheet should also be fine)
2. Put the connectors under the tiles of the playing field.
3. Have fun!
4. If you want to increase the difficulty you can print additional middle pieces.

Rules:

• Every player has 5 stones
• Try to flick the stones into the endzone with your fingers
• It is allowed to kick out the stones from the opponent
• Play alternates in this fashion until every player has shot all his stones
• Count all points, the player with the highest score wins!

You can also make up your own rules if you like!

Note: I redesigned the playing field a little bit after I made these screenshots due to warping issues. I printed a test with the new design and it printed well but ran out of filament so I couldn't provide new screenshots with the whole thing printed.

+++++++++++++++++++++++++++++++++++++++++++++++++

If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!

Happy printing!

Print instructions

Print upside down to have a smooth surface.

As this model uses the whole printbed, it may be sensitive to warping so make sure to have a decent first layer and may also use the provided "warping_fix.stl" mouse ears in the corners if you still got issues.

You may also want to use some color changes!