September 7, 2022
Description
this is a small dinosaur toy. it is printed flat on the print bed and then assambled.
notice the litle bump orientation in the main spine.
it is recommended to check out this instructions short video:
no support is needed.
for me the tolerance between two parts was perfect but you can print two parts and check.
if it is not good just scale on XY only.
this is the onshape link if you want to change somthing
https://cad.onshape.com/documents/56e95bb436b79177f28dc0ab/w/44f2ed861856bc4777d2e0e7/e/6d6826b1d11c8adb0190591c?renderMode=0&uiState=630a2c7cb5640a0fb887ee33
License:
Creative Commons — Attribution
ofer k
