Wall Chess Board

I am still working on a way to mount it to the wall that I like so far this is what I got. 8x8 board requires 9 different style pieces that I made in Tinker Cad.  If you want to make your own pieces the magnate holes are for 8x3 mm Magnets spaced 12.5 mm apart. I included a Low Poly which is what is pictured. I think the traditional pieces would need to be printed upright with supports but I haven't don't it yet.

When it comes to gluing you need to do all  rows or all columns and the push them together one by one wont work. I used gorilla glue. The magnet holes on the board pieces are real tight so I used the heated bed and laid them flat to get some expansion and pushed them in. At least I didn't need glue for that. In the traditional folder there is a stl of the hole guide. I don't know how to use anything else but if you bring that into Tinkercad and make it a hole boom. you Can make your own pieces!  The rectangles are 101.6 mm by 50.8 mm so size the pieces accordingly! Remember to ALWAYS take En Passant 

Modified the pieces from these two sets from the blue website.  

https://www.thingiverse.com/thing:2153267

https://www.thingiverse.com/thing:585218