Virpil CM2/CM3 Profile Mount for large stick

This solution is specifically designed for the following:

Virpil CM2 or CM3 base
Virpil 200mm extension pipe AND
Virpil Z extension

The Counter Weight works near 0 degrees for the Constellation Alpha grip.  Mine was 0.1 degrees off center which I just recalibrated as center.

The Alpha Prime would likely need more weight and a Thrustmaster A-10 even more. Included are the fusion 360 file and STEP file for the counter weight mount to be adjusted as needed for different grips.

The counter weight mount fits the 500g weight from this set.
https://www.amazon.com/dp/B01IP7G3ZK


There are 3 QR parts that hold the stick in place by friction and gravity. I have UHMW tape on the back of my CM2.  The two brackets require supports and some careful cleaning afterwards. Possibly a bit of sanding to make it slide better.

There is also a static mount if you have a flight rig and do not need to remove your stick.