32mm Scale Magnetic Game Tiles

Design intended Print Settings:

• 0.4mm line width
• 0.3 mm layer height
• 10% infill
• Pause Print after layer 19 if you wish to insert magnets. Magnets are not required.

These are the magnets I used.

https://www.amazon.com/gp/product/B0BGY323XZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Your millage will very given the total exterior perimeter of the tiles you print.

Note: make sure you are using a brass nozzle or the magnets will stick to the nozzle as it passes over.