True Hybrid Dart Pusher for Nerf Stryfe

A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts.

Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill.

I printed mine out of PC for Longevity and slight flexibility.

This is a complaint mechanism after all, so i recommend a slightly flexible Filament such as PETG or similar.

I had to drill out the screw hole with a 2mm drillbit, but that maybe due to the warping of the PC Filament i used.

I should work with the two Worker®  Magazine adapters you can see on the picture.