Batmobile from Batman The Animated Series

The Batmobile from the Animated Series.

I always loved this design in the animated series. It had such a sleek and intimidating look to it and was always one of my favorites from all of the various films and series. So here you are.

The assembly is simple.
All the parts should pop into place. A little glue will be required for the assembly, especially for the small exhausts.
 

The Grill Plate requires a colour change at 0.95 from black to grey.
And there are two choices to choose from for the wheels.  There is a design for the wheels which incorporates 608 bearings for a smooth roll.  And another design for those of you which would prefer the wheel design from the Animated Series.

Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together.

Please note some of the parts may cause a choking hazard, so these 3D printed toys are not recommend for children under the age of 6.

The Grill Plate requires a colour change at 0.95 from black to grey.
There are two choices of the wheels to choose from.

1.Incorporates 608 bearings for a smooth roll.
2.Stays true to the animated series wheel design.
The choice is yours.
I also scaled down the small exhausts to 90%, which is the file shared here. I found it much easier to print smaller and glue these parts in. But you may decide to scale these back to 100% and slot these into place. I just found it too finicky to do this.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram or twitter ( I am mostly active on twitter these days ).

https://www.instagram.com/neil3dprints/?hl=en

https://twitter.com/NHengist

Any problems shoot me a DM.

Happy printing. ;-)

Neil