O`Brien v.121 "Highlander" - Foxhole

Introduction

As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I`m proud to showcase the next Warden Armoured Car. The “Highlander” is a great addition to any attack force. Its manoeuvrable, speedy, brings a good suppression platform and is overall just pleasant to have.

https://foxhole.fandom.com/wiki/O`Brien_V.121_Highlander

Since I´m a big fan of 3D-Printed models, I dedicated a lot of my free time to make the model easy 3D-Printable based on the Game. I tried my best to get as close to the Original as possible.

3D - Modell

The Model is split in 8 Parts, I will give a short list on what you will need to print, for one Model and which Filament I used.

PLA (from “Das Filament”)

1x Track
1x Track Mirrored
2x Barrel
1x Hull
1x Turret

Glow in the Dark PLA ( from “Das Filament”)

1x Light Front 1
1x Light Front 2 
1x Tail Light

3D - Slicing

If you want to print this without using the given G-Code, I suggest to take caution with your support. But this Model is on the easier side and should not have the need for Paint on Supports. 

Depending on the size you wish to print at, Layer height is Important. At the 1:35 setting that my G-Code comes in, I recommend 0.15mm or 0.2mm. These are good heights as its a fairly quick print and you still have many of the details visibly.

If you want to slice the Models yourself and get “normal” Miniature sizes use the following 

1:35 you have to shrink it down to 21.3% 
1:100 shrink to 7.42%

3D - GCode

In the supplied G-Code you get 3 packages. I split the parts where I recommend to use PLA Filament into two packages. The "Track” pack and the “Hull, Turret and Barrel” pack.
The third package is very small and consist of the 3 “Lights”, here I recommend using Glow in The Dark Filament for the extra flair in the night.

Assembly

The parts are a snug fit on my printer. The turret should rotate freely. The Wheels are glued in place to secure them.

Since i love to get my Miniatures painted but, I can´t paint worth a dime. My buddy Klaus jumps in for me. His Discord handle is Klaus von Reinherz#0815 

If you are interested in the Model, but don´t have a Printer or can´t paint. Send him a DM and maybe we can set something up.

Final Notes

I am grateful for Siegecamp that they created Foxhole and all the lovely assets with it. I am planning on uploading more Prints from the Game if my free Time allows it.

If any Problems arise with the Model Contact me here or in Discord ZAYn0nDER#9999