Champagne Glass

Perfect for dioramas!

On my Prusa MINI, I am able to fit 6 of these glasses on the bed using sequential printing.

The “drink” part is essential for the construction of the figure! An empty glass will not hold together!

Technical recommendations:

• Layer height: 0.1-0.15mm
• Printing method: Sequential! Printing many glasses regularly can cause stringing/ooze and uneven surfaces due to constantly jumping between objects.
• If printing the “glass” part in PETG, make sure the bed is not too sticky.  Harsh removal of fine pieces can break them!
• Print speed: Under 10mm/s for the “glass” part