December 17, 2022
Description
The Wobbling Prusa Pug Buddy
Lots of tests to get buddy wobblying!
But the pack belongs to the family now :-)
Printing with PLA with a layer height of 0.2mm should work fine.
A flat screw driver will help to break the gaps free and unfold the helix.
There’s a 50 mm and 75 mm model. The taller one wiggles better. Don’t scale the print.
Inspired by this cute bunny.
r2 Update 20221124
New hollow shape for a cleaner model, same measurements (75mm height).
Still no supports needed. “Thick bridges” option gives better prints. You need to apply quite a bite of force to pry the helix open. Try not to hurt yourself!
License:
Creative Commons — Attribution — Noncommercial
cewo
