Hang your 90cm/35~ inch chessex battle mat on a wall to stop creasing with this magnetic hanger.
It has been split into smaller pieces so it can be printed on small printers.
Components
- 10mm x 5mm neodymium magnets - 12 units
- Screws of your choosing depending on your wall type to fasten the back panel to the wall - 2 or 4 units
Assembly
- Snap the dove tail pieces in and glue with superglue. Use the 3mf with all the pieces as reference.
- Insert the magnets into the magnet slots and make sure to orientate them correctly.
- Insert the magnet caps to secure the magnets, they should be quite snug and you can use a rubber mallet if careful otherwise feel free to scale or sand them a bit if too tight.
- Attach the back panel to your wall with 4 x screws
Anthony S
