November 25, 2022
Description
I have designed a simple dice using Fusion 360. There is no need for MMU, no glue, no painting and easy assembling. Just push the inner cube in the outer cube and you are done.
The Inner Cube has one color change to have dots in a different color. The clearance between the two pieces is only 0,1mm. It worked perfectly with my PRUSA MK3S.
The dice is 21 mm square. The wall thickness is 1 mm. I used 15% infill and 0,2 mm layers.
Note:
In case you need more clearance, I have added files with looser tolerances for the Inner Cube. Therefore you may have to use CA glue to hold them together.
Time to play!
License:
Creative Commons — Attribution — Noncommercial
Heber
