Fall Leaf Fidget Spinner

I designed an easy to print, leaf fidget spinner with print in place movement. It uses an aspen, maple, and birch leaf in the design.  If you squeeze the sides, the spinner will stop moving.

Printing Information: 

The “Leaf Fidget Spinner Supports” file includes the supports built into the file. They are easy to remove and sand off for a smooth spinning experience. No assembly required.

Print at .15 layer height to preserve tolerances and enable movement.

If you use the file that doesn't include supports, be sure your slicer doesn't allow supports to intrude into the moving joints and that the supports don't fuse at the joint, as this will prevent proper movement.

Here is a video of the model in motion: