Mini Prusa (Prusa Mate)

As part of my Prusa Printer series - Say hello to Mini Prusa - Prusa Mate.
The adorable, cute little friend to the Desk Mate. He just loves cuddles, printing Groots and hanging out with his mates!!!

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

You'll need glue for the assembly and supports are useful for the silver parts.
There is a separate file for the X-Axis rods as these could use a high infill (They won't require much filament. The high infill is to make the parts stronger).

The file names specify which colors are required and if color changes are needed as well as heights to apply the color changes.

Happy Printing. :-)

Neil

Print instructions

I printed the parts at 0.15mm.

File names specify which colors are required.

Some files require color changes and at what heights the color changes should be implemented at. They also specify which colors to change from and to as well.

To see how to carry out filament changes mid-print, please refer to the link below.
https://help.prusa3d.com/en/article/color-change_1687

The silver Parts - X-Axis Rods have there own file as these should have a high infill to increase strength.

And supports will be needed for the silver parts.

Please refer to the images I have provided for assembly.

If you are unsure about anything send me a message and I will be happy to help.

Happy Printing. :-)

Neil