Improved G.I. Joe Classified figure stands (GI Joe)

After tinkering with my first stands I made some changes to make them better.  Added a bevel.  The old model had tight pegs so I made them smaller (2.85mm diameter). Included is a plain base, a GI Joe star, a Cobra logo (model for logo modified from dSASQUATCH707  on thingiverse), and Arashikage ninja clan.  

I recommend printing in PETG.  When I used PLA the pegs tended to snap off with use. 

I've found the heel holes are fairly inconsistent between figs, so I went with 2.85 which works great on the tight ones (Stormshadow and Cobra Commander) but they might be a little loose for others.   If they are too loose for you I would recommend using a 50 -100 um offset in your slicer. 

I really liked the way these pop with a filament change I just use PursaSlicers color change feature to do this.  Attached pictures I used Overture PTEG Sparkle Blue and MakerGear PTEG Red For the cobra and ninja. Overture Transparent green PTEG and Overture white PETG for the Joe star.    

I used ironing on all top surfaces, but used added 50x50x5 modifier rectangle at 5mm with an ironing modify to turn off ironing on the top of the pegs.   I would not recommend ironing the tops of the pegs. 
 

I skipped Ironing on the green Joe stands and they weren’t bad but I think the Ironing does make a nice difference