December 20, 2022
Description
Remixed model of Hammerhead for AAP01 to fit tracer Unit
Changes:
- Slightly bigger
- Space for tracer unit (Acetech Brighter C or any below 28mm diameter)
- 14 CCW inside for tracer
- Removed bottom rail (added version with this rail)
- Added short upper rail
Print tips:
- Vertical position (such as .STL) for faster and cleaner print. Or 15-45% tilted for more strength.
- Support: YES
- RAFT
- Wall height 0.16-0.2 (mine print was 0.2)
- 100% infill for mounting part. Rest can be 10%-20%
Easy mount:
1. Remove orignal outer barel - 4 screws
2. Use some lube on inner barel o-ring to slide it in easier (optional)
3. Use same screws to instal this new printed one. Don't use much force.
4. If print doesn't fit perfectly just shave some plastic with razor knife and try again.
If you printed one, please upload photos of your AAP <3
License:
Creative Commons — Attribution
Boyairek
