December 19, 2022
Description
Magazine clamp that connects 3 Talon magazines together at an angle. Works with original Worker Talons, angled Talons and printed Thanhlons and possibly others. For assembly two M3 nuts need to be inserted into the pockets and two bolts M3x16mm (or longer; up to 28mm) secure the halves together. The bumper friction fits to the bottom.
On the inside there are pockets to insert 20x20mm foam rubber pads (selfmade or storebought self-adhering ones). This feature is optional but it provides a more secure grip of the magazines.
.stp files are included.
Supports:
No
Notes:
I'd leave print orientation as is and print without support. Bridging of your printer should work just fine
License:
Creative Commons — Attribution — Noncommercial — Share Alike
LoneWolf052
