Silver Arrow Soapbox Race Car

Print Settings

Printer:

Prusa MK3S+

Filament:

Tested with PLA

Layer Hight:

0.2

0.1 for axles and wheel nuts

Infill:

25% minimum

Rectilinear

Exterior Perimeters:

2 for chassis and wheels

3 for axles, wheel nuts and steering wheel.

Brim:

Axles yes, otherwise no

Heated Bed:

Highly Recommended

Supports:

On print bed only

Approximated Filament Usage:

15m

Approximated Print Time:

5 hour.

Minor sanding is potentially necessary for a perfect friction fit on the steering wheel. 

If the car has trouble going straight forward in your racing environment of choice, increase the infill percent in the chassis.