Stackable Catan Card Organizer (enhanced) - English and German version

I changed the original model to smaller size matching for the german version. I skiped the clip thingy because it is not so usefull. Just use a rubber band that will fullfill the task better and is cheaper.
Additionaly I add a frame to hold the buckets together, while they are in use. This is optional, but quite usefull and also uses not much filament.
Due to my limited printer size (prusa mini) I split up the frame in 2 part for 3 buckets each.

print instructions

• You need 6 crates to put all cards in the right place
• let buildplate cool down before you take the printed part, so you don't bend it
• if you print the frame, print 2 of them

I suggest to put the “development cards” in the top crate for best fit. Secure it with a rubber band like in my pictures.

UPDATE 8.1.2023 add tray holder in more variants and add tray holder for the original model and the original model itself so it did not get lost …

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

Hope you enjoy my models.