March 30, 2026
Description
Red engine locomotive toy train (BRIO / IKEA compatible)
You will need the following screws to put everything together.
10x ISO 14585 (DIN7981) 2.9mm x 13mm (https://amzn.to/3WgKty1)
4x ISO 14585 (DIN7981) 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)
Add ring magnets on each side of the train. Use 2x ISO 14585 (DIN7981) 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)
The GCODE of "wagon_hopper_0.2mm..." contains a filament color change at 22.40 mm (Layer 112).
Use a small paint brush with acrylic color and paint on the windows, text, roof etc.
If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you! Lovely 3D printed Toy Trains
Printed with Prusament PLA Galaxy Black and Lipstick Red.
I used the standard Preset "0.2mm QUALITY MK3" in Prusa Slicer.
License:
Creative Commons — Attribution — Noncommercial
TechNerd
