February 2, 2023
Description
Carousel for a small toys or small figures.
I inspired on the page https://www.printables.com/cs/model/335540-ferris-wheel/files , but all model is my work.
The composite model is about 30 cm hight, but it is possible to print it on the printers with 180 mm x 180 mm bed.
You must print these parts:
2x bocnice.stl
2x kladka.stl
6x dno kabinky.stl
12x kabinka bok.stl
1x stojan.stl
1x kolo s dirami.stl
1x kolo s trny.stl
To be composed this model you will need the threaded rod with thread M6 about 13 cm long and 2 pcs of nuts M6.
I printed it from PLA filament without support. Any parts can be printed in a different colour, to make the carousel nice.
In the future I will finish it with the engine drive with the belt and pulley (now is it prepared with kladka.stl).
Updated 20.1.2023:
Now I saved here STLs for prepare of engine. I use little engine, that has a 60 RPM (round per minute) and any power supply 12V ( https://hadex.cz/l757b-motorek-n20-12v-s-prevodovkou-60rpm/ ), power switch ( https://hadex.cz/l262-vypinac-kolebkovy-off-on-1pol250v15a/ ) and power socket 12V.
That all is mounted to “box na motor.stl” and “viko boxu na motor.stl”. All is inserted in “bocnice.stl” and through the pulley I stretched rubber band.
May you like it…
License:
Creative Commons — Attribution — Noncommercial
kadous
