Fold Flat TCG Card Stand

A 3D printed card stand you can fold flat to take with you to your local game store or your friends house for a game of Magic!

It was designed with Magic the Gathering's Commander format in mind so you can clearly show when your commander is in the command zone and have them on display while doing so. Great for keeping your opponents on their toes by reminding them who's waiting to swoop in and ruin their day.

The stand can also be used as a nice display holder if you'd like to place your favorite cards on a shelf. It holds unsleeved, soft sleeved, and hard sleeved cards.

It folds flat to about 7mm and can fit in a standard 100 card deck box with the deck. **I highly recommend facing the flat side towards your cards and using some cheap tokens or land cards as a buffer if you put this in a deck box. I'm not responsible for damage to your cards from improper storage.**

-I recommend printing in PETG or other durable/flexible materials as the model is fairly thin.

-No supports needed. 

-Does require very small bridging sections that may need to be massaged loose depending on your printer. 

To open it the first time after printing gently work the 4 small clasps that hold it closed so that they aren't stuck to the sides of the frame. Then push the crossbar/card tray down while opening up the frame. Finally slot the crossbar/card tray into the notches at the bottom of the frame.