January 9, 2023
Description
This is a lock to replace the original which came with my daughter's Little Tikes Cozy Cruiser (Princess). She was able to easily kick the door open in transit!! 3D Printer to the rescue!
I measured the original, modeled it, and added about 5mm of length to it. This latch fits just fine in the original location and uses the original screw(s). Now when the door is latched, my nearly-2yr-old can't sparta kick the door open and attempt to yeet herself onto the pavement. :) My back thanks me as well (I had been stooped over, manually holding the door shut while trying to push the cruiser around for an hour or so)!
This latch seems to be holding up very well!
If you found this useful, I'd love to hear from you! Feel free to leave a comment or donate what you think it is worth to ya.
Stay safe out there! Thanks, Enjoy!
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament: Hatchbx PLA Black
Notes:
Print this flat side down. You don't have to print this with 100% infill, but I wanted mine to be extra sturdy - also it's pretty small, so why not?
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ZedWizid
