Boeing 747-400 - 1:144

Model description

The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in a three-class layout over a 13,490 km range with its 397 t MTOW.

With 694 747-400’s delivered over the course of 20 years from 1989 to 2009, it was the best-selling 747 variant. Its closest competitors were the smaller McDonnell Douglas MD-11 trijet and Airbus A340 quadjet. In the late 2010s, older 747-400 passenger aircraft were being phased out by airlines in favor of long-range, wide-body twin engine aircraft, such as the 777, 787, and Airbus A350.

Assembly note

The nose landing gear wheels should be connected using a piece of 1,75 mm filament.

Model dimensions

• Length: 47,7 cm
• Wingspan: 44,5 cm

Print settings

• Layer height: 0,2mm
• Outer walls/perimeters: 2
• Bottom layers: 3
• Top layers: 5
• Infill: 0% (except for fuselage fwd.stl, fuselage mid.stl and stand.stl: 25%)
• Minimum layer time: 5 sec
• Perimeter generator: classic (not arachne)

Minimum required print volume is 81x102x180mm. 

Please use the following link if you have questions or issues related to this model: https://discord.gg/b4BzJqe6EK

Additional content

• 747-400F: https://ko-fi.com/s/bd7b8bd4b4
• 747-400D: https://ko-fi.com/s/84c4af8b9d
• 747-400M: https://ko-fi.com/s/52406a2585
• Additional engine options: https://ko-fi.com/s/b787a75e6d
• Tilted/extended gear: https://ko-fi.com/s/58262aa0a6

Support

If you like my models, you can support my work in the following ways:

• Make a donation or buy something from my shop: https://ko-fi.com/clerx
• Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH