Logitech Racing Wheel Shifter Magnets

Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels.

Files:
Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.

Logitech Shifter Magnets Thicker Nut: Same as standard version, but can fit a thicker 2.5mm M3 square nut.

Required Hardware:
(4) 8 x 3mm disk magnets
(2) M3 x 10mm socket cap head screws
(2) M3 square nuts - 1.8mm or 2.5mm thickness

Installation Instructions:

1. Use super glue to attach the magnets to the printed pieces. Insert the magnets so that they all have the same polarity direction. Wait for the glue to dry.
2. Insert the square nuts into the slots.
3. Place the pieces around the steering wheel column. Insert one screw and tighten slightly.
4. Insert the other screw and tighten slightly.
5. Alternate tightening each screw until both are evenly tight.