Hadrian's Wall: Fate Card Tray

This is a storage tray for the Fate cards found in the board game Hadrian's Wall. The tray is part of a set of storage components for Hadrian's Wall. The tray stores both the Fate cards and all of the Roman General player cards. I considered making the tray large enough for sleeved cards, but chose not to do so since the stacked thickness of the sleeved cards would prevent the lid from closing flush on the box.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Resolution:

0.8 mm

Infill: 

20%

Filament: eSun; Amolen PLA+; PLA Pine Green; Gray; Frosted Bronze

Notes:

I did two filament swaps - one to make the Pict faces stand out, and one to provide the top accent layer.

How I Designed This ===================

The piece was designed in Fusion 360 and exported as a .STL file to MeshMixer. To create the Pict faces on the bottom of the tray, a JPG of a Fate card was downloaded from the web and selectively converted to black and white outlines with Photoshop. The JPG was then converted to a .SVG file in Inkscape and uploaded into Fusion 360 for extrusion into the bottom of the tray.

Category: Games