Star Wars Colossus

The Colossus is the main ship/station from Star Wars: Resistance.

The full model is 210mm tall, 47mm long, and 109mm wide. I was aiming for a 1:10,000 scale, but couldn't find much on its canon size. Here is a photo of this model with a First Order Resurgent-class Star Destroyer at 1:10,000 scale:

Print Instructions

The model is split into three parts for printing. The biggest part is 175mm tall.

• “print_sw_colossus-platform” requires supports on buildplate an a low layer height (I've used 0.05mm)
• “print_sw_colossus-hull” requires supports on buildplate. Printed at 0.15mm layer height.
• “print_sw_colossus-thruster” requires supports on buildplate an a low layer height (I've used 0.05mm)

The file “print_sw_colossus-full” is the full, unsplit model. I do not recommend trying to print this version.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#